Walk Behind

Ride On

Commercial Use Medical Environments Electric Powered Battery Powered Small Areas Comac Dosing System

Download Brochure

Abila

Description

Abila 45 E-B/50 E-B-BT/52 BT.
Suitable for the maintenance cleaning of limited-size areas and cluttered spaces of surfaces up to 1,400 sq. m.
These are very compact scrubbing machines.Thanks to their width - just 50 cm – they are suitable for cluttered areas. They are especially suitable for cleaning in environments like sales points, car repair shops, gyms or health care environments in general. The single brush version is suitable for maintenance cleaning, whereas the two brushes are recommended for deep cleaning tasks. In this latter case, the automatic drive version with continuous speed control is suggested.
The electrically-powered version is recommended instead for obstacle-free areas.

Abila 45 E-B/50 E-B-BT/52 BT scrubbing machines are available both in the scrubbing single-brush, electrically- or battery-powered version with 43 and 51 cm working width and in the version with 2 disc brushes and 50 working width.
Abila 50/52 also come in the automatic-drive version (BT) for frequent use and where there are ramps.

They stand out in their segment thanks to:
• the complete range of models,
• the category-leading performance,
• the tank capacity,
• the silence, which offers high work comfort,
• the reliability,
• the ease of use,
• the innovative design,
• limited operating costs.





Abila 45B


Abila 50BT


Abila 52BT


Abila 45E

Working capacity

1470 m²/h

Autonomy up to

unlimited

Working width

43 cm

No. of brushes Ø

1(42) cm

Width with squeegee

66 cm

Solution tank

48 |

Noise level dB

62 A

Power supply

With cable

Abila 45B

Working capacity

1470 m²/h

Autonomy up to

2 h

Working width

43 cm

No. of brushes Ø

1(42) cm

Width with squeegee

66 cm

Solution tank

48 |

Noise level dB

62 A

Power supply

Battery (24V)

Abila 50E

Working capacity

1.750 m²/h

Autonomy up to

unlimited

Working width

51 cm

No. of brushes Ø

1(50) cm

Width with squeegee

76 cm

Solution tank

48 |

Noise level dB

62 A

Power supply

With cable

Abila 50B-BT

Working capacity

1.750 m²/h

Autonomy up to

2 h

Working width

51 cm

No. of brushes Ø

1(50) cm

Width with squeegee

76 cm

Solution tank

48 |

Noise level dB

62 A

Power supply

Battery (24V)

Abila 52BT

Working capacity

1.750 m²/h

Autonomy up to

2 h

Working width

50 cm

No. of brushes Ø

2(25.5) cm

Width with squeegee

76 cm

Solution tank

48 |

Noise level dB

62 A

Power supply

Battery (24V)


Advantages


CDS is the new water and detergent dosing system made by Comac enabling the operator to dose water and detergent separately, thanks to 2 separate selectors.
This means that the amount of solution can be adapted almost immediately to the specific type of dirt encountered, eliminating that excess waste involved with traditional scrubbing machines.

Adopting the CDS leads to a significant increase of the productivity
and constant control on labour costs, which is particularly important when the machine is used on a daily basis.

With Comac's CDS, you can change the type of detergent at any time, simply by replacing the canister (3 l).
This means:
· total safety of the operator, who never comes into contact with the chemical;
· possibility of using the detergent most suitable for the intervention's characteristics

The BT versions are equipped with a speed adjustment device




The particular design of the recovery tank and the large-diameter drainage tube allow completely emptying the dirty water collected without leaving any type of residue IN A VERY SHORT TIME and without any manual interventions

The new soundproof vacuum head, where the suction motor is fitted, protects it from water seepage and, above all, ensures extremely low noise levels without giving up suction power.

Upon request, the Abila scrubbing machines can also be fitted with the handy on-board battery charger. To recharge the machine, all it takes is connecting the supplied cable to a regular power socket, simplifying maintenance at the end of the work cycle.

Photo Gallery